The main purpose of ATS/AMF is
to detect the main failure and give a remote signal to the generator in case of main
failure, main low voltage, main high overvoltages, main 1 or 2 phase failure.
The other purpose of this is that it also controls the generator and main contractor.
We use interlocking of the contactor in the panel.
We use ATS 10 from EMKO electronics for the above mentioned purposes.
Its designing depends on the size and function of the panel.
The 1.5mm2 wire is used for wiring inside the panel.
The other purpose of this is that it also controls the generator and main contractor.
We use interlocking of the contactor in the panel.
We use ATS 10 from EMKO electronics for the above mentioned purposes.
Its designing depends on the size and function of the panel.
The 1.5mm2 wire is used for wiring inside the panel.
ATS PANEL OUTSIDE VIEW
INSIDE VIEW 1
INSIDE VIEW 2
ATS 10 WIRING DIAGRAM
There are 5
breaker used.
(1) . battery positive terminal
(2) phase 1 main
(3) phase 2 main
(4) phase 3 main
(5) generator phase
Solar megawatt Project Consultancy Services in ahmedabad
ReplyDeleteVibrant Solar System is a leading service provider of a Solar megawatt Project Consultancy Services in ahmedabad with large corporate network in all over Gujarat.
The sun provides an abundant and free source of energy—let's harness it. Solar company Los angeles
ReplyDelete